ARYA TURRET SERIES
Model: 135 | 165
CONTROL SYSTEM FEATURES
- Manual Data Input
- 2 Axis simultaneous
- Part Program Storage and Editing
- Constant Surface Speed Control
- Tool nose radius Compensation
- Feed rate override
- Circular Interpolation
- Threaded Cutting Cycle
- Direct drawing dimensions programming
- Absolute / Incremental programming
- RS-232 serial interface port
- Backlash compensation
- Graphic Simulation
- Electronic hand wheel
- Run hour display
- LCD display
- Self diagnostick
- USB Port
STANDRD FEATURES
- Hardened & Ground EN-9 Box Guideways
- AC Spindle Drive & Servo Drive
- Hydraulic Chuck with Actuating cylinder
- Hydraulic Unit, Foot Switch, Coolant System
- Centralized Lubrication System
- Electrical Quality Device
- Boring holder & Axial holder
OPTIONAL
- Chip Converyor
- Bar feeder
- Bar Puller
- Hydraulic Turret
- Stabilizer
- Auto Door
WARM UP OPERATION
- Warm up Operation in the Machine must be do when machine power on after a certain time.
- In Warm up Operation of Machine move the all Axis without job in a Progarm Cycle.
Tool Interfernce Diagram
Working Range
POWER DIAGRAM
| CAPACITY | UNIT | 135 | 165 | ||
| SWING OVER BED | MM | 350 | 350 | ||
| MAXIMUM TURNING LENGTH | MM | 285 | 275 | ||
| MAXIMUM DIA. BETWEEN CENTER | MM | 165 | 165 | ||
| DISTANCE BETWEEN CENTER | MM | 250 | 300 | ||
| STANDARD TURNING DIA. | MM | 165 | 200 | ||
| CHUCK SIZE (Optional) | MM | 135 / 165 | 165 / 200 | ||
| MAX. TURNING DIA. | MM | 250 | 250 | ||
| X-AXIS TRAVEL (A) | MM | 150 | 165 | ||
| Z-AXIS TRAVEL (B) | MM | 300 | 300 | ||
| RAPID TRAVERSE | M/Min. | 24 | 24 | ||
| AXIS | |||||
| X-Z AXIS LM | 35 | 35 | |||
| Z AXIS BALL SCREW (P x D) | 32 x 10 | 32 x 10 | |||
| MOTOR TORQUE (Z axis) | NM | 6 | 6 | ||
| X AXIS BALL SCREW (P x D) | 32 x 10 | 32 x 10 | |||
| MOTOR TORQUE (X axis) | NM | 6 | 6 | ||
| MAIN SPINDLE | |||||
| SPINDLE MOTOR : SIEMENS | KW | 5.5 / 3.5 | 5.5 / 7.5 | ||
| FANUC | KW | 5.5 / 3.5 | 5.5 / 7.5 | ||
| SPINDLE BORE | 38 | 47 | |||
| SPINDLE NOSE | A2-4 | A2-5 | |||
| MAXIMUM BAR CAPACITY | 25 | 36 | |||
| SPINDLE SPEED RANGE | RPM | 50-3500 | 50-3000 | ||
| FULL POWER SPEED RANGE | RPM | 750-3000 | 750-2250 | ||
| TOOL | |||||
| NUMBER OF STATION | 8 | 8 | |||
| MAX. BORING BAR DIA. | 32 | 32 | |||
| TOOL SIZE (CROSS SECTION) | 20 x 20 | 20 x 20 | |||
| TOOL STOCK | |||||
| QUILL DIA. | 75 | 75 | |||
| QUILL STROCK | 100 | 100 | |||
| TRUST (ADJ.) | 500 | 500 | |||
| OTHERS | |||||
| POSITIONING ACCURACY | MM | 0.010 | 0.010 | ||
| REPEATABILITY | MM | 0.005 | 0.005 | ||
| WEIGHT | KG. | 1900 | 1900 | ||
| TOTAL POWER | KVA | 15 | 15 | ||